Trigger Control Parts.

May 17, Drive out the front sight pin (holds in the front sight and the bushing. Use an 11MM 1/4" socket against the inside/back of the bushing in the slide with a 1/4" extension as the driver (hit it with a hammer after securing the slide).

May 03, As mentioned, the front sight dovetail of CZ 75 pistols and many clones is longitudinal, meaning it runs front-to-back instead of side-to-side, with the front sight getting sandwiched between the slide and the barrel bushing.

Some sights come pre-milled with a roll pin slot and others do not. In the former case, you have to install the sight Reviews: Dec 29, Try it on a part of the frame under the grips. If it works, get an old paint brush, and paint the gun with that stuff, removing the bubbled up finish periodically with paper towels, and repeat until the finish is off.

(If there's an auto body shop nearby, you might talk to them to see what they'd suggest for getting that finish off.

Could not wait for the rain to stop.

Feb 16, Disassemble the CZ D PCR in the same manner as the standard CZ 75, which is a bit different from what you may be used to with other pistols. Remove the magazine from the pistol and ensure that the pistol is unloaded. Then, visually inspect to ensure that the pistol is safe. Place the hammer in the quarter-cock position. Aug 05, CGW Match Bushing 2 rubber floor plates for my Mags. I added a HiViz Lightwave front sight and a CZ Custom PCR Rear Sight much easier to deal with if you drive the pin out and stick a dowel or something in there to hold it together while you remove it.

Dec 31, This frame is usually used with a Kadet conversion for bullseye matches. The reason is that the 9mm slide that came with the frame was a dog, due to a loosely fit barrel bushing from the factory. I put it in a drawer. When CGW started selling replacement bushings, I decided to try one in this doggy slide. It worked.

Here is a video tutorial.

I mean really shrubmulching.barg: cz pcr. Add to Wishlist. Compare. SP Threaded Barrel. CZ factory 1/2x28 threaded heavy SP barrel in 9mm. Only fits SP manual safety, decocker, Shadow 1 and Phantom with barrels utilizing a" diameter.–Availability: Out of Stock. There are 2 different barrel diameters for the 75 series" and".

This bushing only fits the". Made from steel and heat treated to RC50+.

Reduces barrel muzzle play to at lock-up. This is a direct replacement for the loose OEM bushing. Fits 75B 9mm compact and full size, P (all versions), 75D/PCR, 85C, 85B, etc. Available in hard chrome for an added cost. This video explains how to remove the current front sight and replace it with an aftermarket sight.

This applies to the CZ 75, SP, and other CZ models wit.