A word of caution when using the cross cutting chainsaw method.

Dec 07, Certified arborist Mark Chisholm provides helpful and important safety tips for professionals on how to fell a shrubmulching.bar all the Pro Tips videos here: http.

Facebook Twitter Pinterest Print this page.

When slashing (felling) small trees, cut the stumps as close to the ground as possible without hitting the dirt with your chain. Stumps are cut low so they will not be as noticeable and will present fewer hazards for people and wildlife. Small trees can be limbed while they are standing. Don’t cut with the chain saw above shoulder height. LimbingFile Size: 1MB. large tree may be felled against its natural lean by using the boring technique.

Use the open-face notch and bore cut the tree to establish the hinge. DO NOT CUT OUT THE BACK. Allow enough backwood to keep the tree secure. Remove the saw from the bore cut and insert wedges tightly into it. Release the tree from the back. Complete the technique by wedging the tree over.

This technique is for. 6 steps to successful tree felling 1. Plan ahead.

Be careful not to cut too fast and don't be afraid to stop and check your work as you proceed.

When it comes to tree removal by using a chainsaw, preparation is key. If you plan the felling and which 2. Check the felling direction. Continue by determining the felling direction by carefully studying the tree. How do the 3. Prune the. Safe Chain Saw Use Proper Use of Bumper Spikes (Dogs) Learn to use the saw’s bumper spikes (dogs) as a pivot point when felling or bucking.

This technique will enhance your control of the saw and stump grinding gainesville fl the saw’s efficiency while reducing fatigue.

Cutting with the bottom of the bar pulls the chain saw away from the shrubmulching.bar Size: 1MB. Assess the condition of the tree and the surrounding area, and take the appropriate safety precautions before chainsaw operation. Remember: plan your work and work your plan. Before you start your STIHL chainsaw, make sure you fully understand your instruction manual, which covers the important items that are specific to your chainsaw’s. A chainsaw's performance during wood-cutting 14 Techniques in minimising chainsaw performance during cutting 15 Basic principles of cross-cutting 16 Points to note 16 Assessment of internal stress 16 Top bind and Bottom bind 17 4.

FELLING TECHNIQUES